Retractable Basin Mixer with Lift Feature

• Lift-Up Spout Design: The vertical lift mechanism raises the water outlet, providing extra clearance for filling tall vases, washing large items, or improving ergonomic reach.
• Retractable Pull-Out Hose: Extends smoothly for targeted rinsing, basin cleaning, or hair washing, then retracts securely back into place.
• Dual-Spray Modes: Toggle between a soft aerated stream for daily use and a focused spray for tougher cleaning tasks.
• Precision Ceramic Cartridge: Tested for thousands of cycles, ensuring leak-free performance, accurate temperature control, and silky-smooth handle operation.
• Water-Saving Aerator: Introduces air into the water stream to reduce splashing and lower consumption while maintaining strong pressure.

• Modern Residential Bathrooms: Ideal for contemporary vanity units, offering both sleek aesthetics and practical multi-functionality.
• Hotel & Hospitality Spaces: Designed for high-frequency use with durable internals and easy-to-clean surfaces.
• Salons & Utility Areas: The lift feature and pull-out hose make it highly suitable for backwash basins, pet grooming, or utility sinks.

1. Turn off both hot and cold water supply valves beneath the sink.
2. Ensure the mounting hole on the basin or countertop matches the standard single-hole diameter required.
3. Thread the supply lines and mounting hardware through the hole, then secure the faucet base from below using the provided fixing nut.
4. Connect the hot and cold inlet hoses to the corresponding supply valves, using thread seal tape if necessary.
5. Slowly open the water supply, check all joints for leaks, and run water through the faucet for 30 seconds to flush out any installation debris.
6. Test the lift mechanism and pull-out hose retraction to ensure smooth operation before regular use.

Note: If your plumbing configuration differs from standard setups or if local building codes require certified installation, please consult a licensed plumber.

• Wipe the exterior regularly with a soft, damp cloth to maintain the finish; avoid abrasive pads or harsh chemical cleaners.
• Periodically check the aerator for mineral buildup and rinse it under running water to restore optimal flow.
• Ensure the pull-out hose fully retracts after each use to prevent tangling or internal spring fatigue.
• If the faucet will remain unused for extended periods (e.g., in vacant properties), drain residual water and protect from freezing temperatures.

• Do not force the lift spout beyond its designed range of motion to avoid damaging the internal mechanism.
• Avoid pulling the retractable hose sharply or letting it snap back, as this may compromise the retraction system over time.
• Always test water temperature with your hand before use, especially in households with children or elderly users, to prevent scalding.
• Ensure water pressure stays within the manufacturer's recommended range to protect the ceramic cartridge and internal seals.

We are committed to product quality and customer satisfaction. Should you encounter any manufacturing defects or operational issues under normal use, please reach out with your order information for prompt assistance.

Each unit is typically packaged with protective foam, an installation guide, mounting accessories, and flexible supply lines. Bulk shipments are securely palletized for safe transit.