Dual-Handle Design
The 2-Handle Bathroom Faucet features two independent ceramic valve handles, each controlling the flow of hot and cold water. The ceramic valve handles offer high-precision sealing and durability, and have been tested to withstand over 50,000 cycles of opening and closing without noticeable wear or leakage. This design allows users to precisely control the temperature of the mixed water by adjusting the position of the two handles, with an accuracy of ±1°C.
High-Quality Stainless Steel
The faucet body is constructed of 304 stainless steel, a material with excellent corrosion resistance and mechanical properties. 304 stainless steel has a tensile strength of 520-760 MPa and an elongation of 40%-60%, ensuring the faucet can withstand various external forces without deformation during long-term use.
Three-Hole Mounting Design
The 2-Handle Bathroom Faucet features a standard three-hole mounting design: a center hole for mounting the faucet body and two side holes for mounting the hot and cold water control handles. This design not only fits into the pre-set mounting holes on most countertops and bathroom cabinets, but also provides excellent stability and a tight seal. The three-hole installation hole spacing is typically 150mm to 200mm, making it compatible with most bathroom countertop and vanity designs.
Easy Installation
Installing a 2-Handle Bathroom Faucet is simple, requiring relatively few tools and steps. The entire installation process typically takes between 30 minutes and an hour, requiring no specialized skills or tools, making it easy even for DIY enthusiasts.
Excellent Water-Saving Performance
This product features advanced water-saving technology, utilizing an internal flow regulator to effectively control water flow rate and volume. Test data indicates that compared to traditional faucets, water conservation is improved by 30% to 40%, significantly reducing water waste while meeting daily usage needs.
Extremely Long Lifespan
The 2-Handle Bathroom Faucet boasts an exceptionally long lifespan, boasting over 15 years of normal use. This is achieved through its high-quality stainless steel and advanced manufacturing process, ensuring it maintains excellent performance even under frequent use.
High-end Residential Bathrooms
In high-end residential bathrooms, a 2-handle bathroom faucet is an ideal choice for enhancing overall quality and user experience. Its high-quality stainless steel construction and precise dual-handle temperature control provide a comfortable and safe water environment for all family members. 82% of users in homes with a 2-handle bathroom faucet reported a significant improvement in their hand and face washing experience.
Hotels
For hotels, a 2-handle bathroom faucet is a key feature for improving the quality of guest bathrooms and enhancing guest satisfaction. In high-end hotel bathrooms, its simple appearance and high-quality stainless steel complement any luxurious decor, creating a high-end, comfortable water environment for guests. According to hotel industry surveys, guest complaints regarding water temperature issues in hotel rooms equipped with a 2-handle bathroom faucet decreased by 55%.
Senior Citizens' Apartments
In senior citizen apartments, a 2-handle bathroom faucet is a crucial feature for improving the quality of life and safety of seniors. As people age, they become less sensitive to water temperature and their coordination may decline. This makes them more susceptible to temperature fluctuations when using faucets, potentially leading to burns or colds. The 2-Handle Bathroom Faucet's precise dual-handle temperature control allows caregivers or seniors to adjust the water temperature slowly and precisely, ensuring safe water use.
Healthcare Handwashing Facilities
In healthcare facilities, 2-Handle Bathroom Faucet is widely used in patient restrooms, public washbasins, and clinics. Its high-quality stainless steel material and excellent corrosion resistance ensure that the device remains in good condition despite long-term exposure to various cleaning agents and disinfectants. According to statistics, medical institutions that install this faucet can reduce their monthly water bills by approximately 30%, demonstrating excellent environmental and economic benefits.
Clean the faucet surface regularly
Clean the surface of your 2-handle bathroom faucet monthly with a soft, damp cloth to remove dirt, scale, soap residue, and other contaminants. Avoid using harsh cleaning tools or abrasive cleaners to avoid scratching the stainless steel surface and affecting its corrosion resistance.
Inspect seals and connections
Inspect the faucet seals and water pipe connections quarterly to ensure they are properly sealed and leak-free. To do this, turn off the hot and cold water valves and observe the faucet outlet and connections for leaks or drips. If minor leaks are detected, tighten the connection nuts or replace the seals.
Rinse the valve core and filter regularly
Flush the faucet valve core and built-in filter at least once a year. To clean, first turn off the hot and cold water valves, remove the faucet handle and valve core, and remove the filter. Place the valve core and filter in a clean container and rinse with clean water to remove any impurities and scale. For harder-to-remove limescale, use a dedicated limescale remover and soak for 10-15 minutes before rinsing.
Regular Inspection
A two-handle bathroom faucet should undergo a comprehensive inspection and maintenance every six months to ensure long-term stable operation. This inspection should include the faucet's appearance, the condition of the seals, and the operability of the handles. Regular inspection and maintenance can identify and resolve potential problems, extending the life of the faucet and ensuring it remains in good working condition.
The 2-Handle Bathroom Faucet features a standard three-hole installation design, compatible with most commercially available bathroom countertops and vanities. Whether it's stone, ceramic, or glass, as long as the pre-set holes meet the standard spacing, it can be installed smoothly.
Faucet height is often carefully considered, aiming to balance aesthetics and functionality. The standard height is approximately 200mm to 250mm, ensuring smooth water flow without disrupting the overall harmony of the countertop. For special needs, such as requiring a wider water flow range or to fit a specific vanity design, please contact us for consultation.
The 2-Handle Bathroom Faucet's handle is ergonomically designed for simple and effortless operation. This design provides added convenience for the elderly or those with reduced hand strength, making daily use easier and more comfortable.
This faucet offers excellent flow intensity and adjustment range, with separate hot and cold water control handles for adjustment from a drip to a full stream. The flow regulator allows users to adjust the water flow rate to their needs, saving water. The aerator also provides a richer, smoother flow, minimizing splashing.
Two-handle bathroom faucets typically come in a variety of colors to suit different decor styles. Classic color options include chrome, nickel, oil-rubbed bronze, and matte black. These colors are meticulously crafted to resist corrosion and fade. Choosing a faucet will help you match your bathroom's overall color palette and personal preferences.
Mobile Phone:
Phone:
Contact Now