This is a single-handle kitchen sink faucet, featuring a modern, minimalist square base and a high-arc spout design. Its clean lines make it suitable for modern kitchens and commercial projects. The faucet body is made of lead-free solid brass and features a high-gloss polished chrome finish, ensuring both structural strength and resistance to corrosion and easy cleaning. The single-handle design allows for stable control of water flow and temperature, while the 360° rotating spout provides a wider range of motion for sink use. It is suitable for installation in home kitchens, rental apartments, and standardized projects.
1. Structural Design
The Single Hole Kitchen Mixer Tap features a high-arc spout combined with a square base. The spout height is approximately 11.1 inches, covering a large sink area. The 360° swivel design allows for full-range water access in multi-basin or wide sinks, reducing blind spots during cleaning and improving daily efficiency. It is suitable for standard kitchen countertop depths and common sink layouts.
2. Material Performance
The faucet body is made of solid brass with a copper content of ≥59%, effectively reducing the risk of impurity precipitation. The surface is treated with a polished chrome finish, ensuring a stable coating thickness and providing excellent corrosion and oxidation resistance. It is resistant to rust in high-humidity environments, making it suitable for frequent use in kitchens.
3. Water Flow Control
It features a single lever handle with smooth rotation and even damping. The internal ceramic valve core has a lifespan of over 500,000 cycles, reliably controlling water flow and on/off status, reducing the likelihood of leaks and meeting the demands of long-term continuous use.
4. Flow Rate Parameters
The standard water flow rate is 1.5 GPM, balancing stable water flow with water conservation. This flow rate meets the standards for most residential and project kitchens, providing a continuous and even stream of water during daily cleaning and food preparation.
5. Installation Specifications
It uses a single-hole deck-mounted installation structure, compatible with common kitchen countertop hole sizes. The spout extends approximately 6.3 inches, covering the main operating area. Installation requires no complex modifications, making it suitable for new installations and upgrades in existing kitchens.
1. Home Kitchens
In home kitchens, the 11.1-inch spout height of this Single Hole Kitchen Mixer Tap meets daily needs for washing vegetables, dishes, and filling containers. The 360° swivel design allows water flow to cover double or wide sinks, increasing operational flexibility, reducing splashing, and enhancing overall user comfort.
2. Apartment Projects
For rental apartments or multi-unit residential projects, the 1.5 GPM standard flow rate ensures stable water supply while helping to control overall water consumption. The lead-free brass construction and ceramic cartridge are suitable for long-term, frequent use, reducing future maintenance and replacement costs.
3. Commercial Kitchens
In light commercial or employee kitchen environments, the high-arc spout facilitates cleaning larger utensils or containers. The polished chrome surface resists grease and is easy to clean with a simple wipe, making it suitable for locations requiring both aesthetics and durability.
4. Engineering Projects
The single-hole installation structure and standardized dimensions facilitate bulk purchasing and standardized installation for engineering projects. The square base and modern design complement various countertops and kitchen styles, reducing design conflicts and improving overall project consistency.
5. Kitchen Renovation
In kitchen renovations, this model can directly replace common single-hole faucets. The 6.3-inch spout reach and standard interface design allow for replacement without additional drilling or structural modifications, shortening construction time.
Regular cleaning: After daily use, use a soft damp cloth with a small amount of neutral detergent to gently wipe the surface of the faucet to remove water stains and stains. Perform a deep clean once a week, using a special stainless steel cleaner, diluted at a ratio of 1:10, and use a soft brush to dip the detergent solution and carefully scrub all parts of the faucet, including the water outlet, handle, base, etc., then rinse with clean water and wipe dry with a dry cloth. This can prevent long-term accumulation of dirt, keep the faucet as bright as new, extend its service life, and ensure its beautiful appearance and normal use.
Regularly check the seals: Check the seals of the faucet, such as O-rings, gaskets, etc., once a month. Use a magnifying glass to observe whether the seals are worn, deformed, or aged. If the seal is found to be worn more than 0.5 mm wide or has obvious deformation or loss of elasticity, it should be replaced in time. When replacing seals, products with the same or better specifications as the original ones should be selected to ensure that the dimensional accuracy of the seals is within ±0.1 mm. Pay attention to the correct position and direction when installing to ensure good sealing performance of the faucet and prevent water leakage.
Lubricate moving parts regularly: Lubricate the moving parts of the faucet once every two months. First, disassemble the handle and valve core parts of the faucet, and use compressed air to blow away the dust and impurities on the surface of the parts. Then, choose food-grade grease and apply it to the contact surface of the moving parts. The amount of grease applied should cover 60% to 70% of the contact surface. For example, the thickness of the grease should be controlled between 0.1 mm and 0.2 mm on the rotating shaft of the handle and the moving part of the valve core. Reassemble the parts after lubrication to ensure smooth movement, reduce friction, extend the service life of the parts, and improve the operational flexibility of the faucet.
Check the water pressure regularly: Measure the water supply pressure of the faucet once a quarter. Use a water pressure gauge connected to the water inlet of the faucet, turn on the faucet, and read the value of the water pressure gauge. Normal water pressure should be between 0.1 MPa and 0.5 MPa. If the water pressure is lower than 0.1 MPa, it may affect the normal water flow of the faucet. At this time, it is necessary to check whether the water supply system is blocked or whether the water pump is working properly; if the water pressure is higher than 0.5 MPa, it may cause pressure on the internal structure of the faucet, causing damage, and a pressure reducing valve needs to be installed for adjustment. By checking the water pressure regularly, ensure that the faucet works under the appropriate water pressure environment to ensure its performance and service life.
Winter antifreeze measures: Prepare the faucet for antifreeze before winter comes. If the kitchen is located in a cold area, when the temperature may drop below 0 degrees Celsius, the water supply pipe of the faucet should be wrapped with insulation materials, such as foam insulation pipes with a thickness of 5 mm to 10 mm. On extremely cold nights, the faucet can be slightly opened to keep the water dripping, and the dripping speed is controlled at 1 to 2 drops per second to prevent the water in the pipe from freezing and expanding, causing damage to the faucet and pipe. If the faucet is not used for a long time, the water supply valve should be closed and the accumulated water in the pipe should be drained to avoid damage caused by freezing and ensure the safe use of the faucet in winter.
Regularly test the water quality: Test the water quality of the kitchen water supply every six months. The test items include the acidity and alkalinity (pH value), hardness, chloride ion content, impurity content, etc. in the water. The normal pH value should be between 6.5 and 8.5, the hardness of the water should be less than 300 mg/L (calcium carbonate), and the chloride ion content should be less than 500 mg/L. If the water quality does not meet the standards, it may corrode the stainless steel surface and internal parts of the faucet. According to the water quality test results, you can consider installing appropriate water treatment equipment, such as a water softener or water purifier, to improve the water quality and reduce the impact of harmful substances on the faucet, which is also beneficial to the overall water safety of the kitchen and the long-term use of the equipment.
A: Yes. This product features a single-hole deck-mounted installation structure, compatible with most standard kitchen countertops and sink hole sizes. The spout height and reach are designed to meet conventional kitchen usage proportions, and it can be used directly for new installations or as a replacement for old faucets without requiring additional structural modifications.
A: The polished chrome surface undergoes multi-layer treatment, providing excellent resistance to water stains and dirt. A simple wipe with a soft cloth after daily use will restore its shine. It is easier to maintain than ordinary coatings and is suitable for high-frequency use in kitchen environments.
A: No. The single handle incorporates a ceramic valve core, ensuring smooth operation and high wear resistance, capable of withstanding over 500,000 operations. The handle provides clear feedback and is not prone to loosening during long-term use, making it suitable for continuous high-frequency switching scenarios.
A: No. The rotating part features a precision sealing structure design, maintaining stable water pressure output within a 360° rotation range, effectively preventing leaks or loosening, and meeting multi-directional water access needs.
A: Yes. This product features a standardized design, high material and structural stability, facilitating bulk installation and maintenance. The lead-free brass body and standardized parameters are beneficial for long-term project use and subsequent management.
Mobile Phone:
Phone:
Contact Now