The Brass Pull Out Kitchen Tap is a kitchen water solution featuring a solid brass construction and a pull-out spray head system, primarily targeting users who demand durability, stable water pressure, and long-term reliability. This type of faucet utilizes a high-arc body structure and a retractable hose system to provide comprehensive coverage of the sink area, while also offering both stream and spray water modes. Its structural design is optimized for long-term use and frequent operation, making it suitable for project-based requirements with specific purchasing standards regarding stability, maintenance cycles, and installation compatibility.
1. Stable Structure
The Brass Pull Out Kitchen Tap features a one-piece cast brass body structure with a copper content typically no less than 59%. Under a standard water pressure of 0.6MPa, the body structure deformation rate is less than 0.2%, ensuring long-term use without loosening issues. Key connection points are secured with thickened threads and metal locking structures, effectively reducing the risk of structural displacement during frequent pulling and rotating operations.
2. Smooth Pull-Out
The pull-out hose of this Brass Pull Out Kitchen Tap typically uses a double-layer stainless steel braided structure, with an inner tube made of pressure-resistant EPDM material. The standard extension range is 350–400mm. This design effectively prevents incomplete hose retraction or jamming, ensuring stable operation and pulling efficiency during frequent cleaning.
3. Stable Water Flow
The water outlet system features switchable stream and spray modes. The internal flow channels of the spray head are optimized, controlling water flow deviation within ±10% under rated flow conditions. Combined with a high-density aerator structure, the water coverage area per unit time can be increased by approximately 30%, improving rinsing efficiency without increasing water consumption.
4. Durable Valve Core
The internal control system typically uses a ceramic valve core structure, with a valve plate hardness of HRA88 or higher, providing excellent wear resistance and sealing performance. The response time in the hot and cold water mixing zone is controlled within 0.1 seconds, allowing for precise water temperature adjustment and reducing the risk of valve core wear due to frequent adjustments.
5. Reliable Surface
The surface treatment uses a multi-layer electroplating process, with a total plating thickness typically controlled to be above 0.25 micrometers. It passes a neutral salt spray test of at least 48 hours without significant corrosion marks. This Brass Pull Out Kitchen Tap effectively reduces the probability of oxidation and discoloration in high-humidity kitchen environments, maintaining surface integrity even after long-term use.
1. Home Kitchens
In a home kitchen environment, the Brass Pull Out Kitchen Tap is compatible with common single or double sink configurations, and its 360-degree rotation capability covers both the center and corners of the sink. Based on household water usage statistics, the average daily number of on/off cycles is approximately 40–60 times. The product's structural strength and valve core lifespan are designed to meet long-term household use needs, while reducing the frequency of maintenance due to frequent use.
2. Apartment Projects
In apartment projects, the standard mounting hole size for this Brass Pull Out Kitchen Tap is 30–50mm, compatible with most prefabricated countertop specifications. Its stable pull-out and retraction system reduces the likelihood of component damage due to improper use by residents, helping property management control future maintenance costs. The overall height and spout reach are also designed for efficient operation in limited spaces.
3. Rental Properties
Rental properties typically experience high usage frequency and diverse user habits. This product, with its high-durability valve core and metal hose structure, reduces the risk of leaks and loose components. Based on industry experience, using a durable Brass Pull Out Kitchen Tap can extend the maintenance cycle for faucets to 3–5 years or more, improving overall facility stability.
4. Renovation Projects
In kitchen renovation projects, this Brass Pull Out Kitchen Tap can directly replace existing standard-hole faucets without requiring extensive modifications to the countertop structure. Its installation height and spout reach conform to mainstream cabinet size standards, reducing secondary construction costs. The stable water flow control also helps improve the overall kitchen user experience.
5. Custom Homes
In custom home projects, the structure and surface treatment of this Brass Pull Out Kitchen Tap offer some customization options, allowing it to be adapted to the overall kitchen style. Its stable mechanical performance provides long-term reliable water supply for high-end homes, while meeting higher demands for water temperature control and operational precision.
Clean the nozzle regularly: Use a soft-bristled brush with mild detergent to gently scrub the surface and water holes of the Commercial Pull Down Kitchen Faucet nozzle at least once a week to remove any scale, food residue and stains that may have accumulated. Rinse with clean water after cleaning and wipe dry with a dry cloth to avoid residual moisture that may cause rust or bacteria to grow on the nozzle, ensuring that the nozzle always maintains a good water flow and hygienic condition to extend its service life.
Check the seal: Check the seal inside the faucet once a month to see if there is any wear, aging or deformation. The integrity of the seal directly affects the sealing performance of the faucet. If any problems are found, the seal should be replaced in time to prevent water leakage and dripping, avoid water waste and water damage to the kitchen countertop. Generally, the replacement cost of the seal is low, but it is essential for the normal use of the faucet.
Hose maintenance: Regularly check the surface of the hose for scratches, wear or cracks, and conduct a detailed inspection at least once every six months. If the hose is found to be slightly damaged, it can be temporarily repaired with waterproof tape, but if the damage is more serious, the hose should be replaced in time to prevent the hose from rupturing and leaking, affecting the normal use of the faucet. At the same time, avoid excessive stretching or twisting of the hose during use to avoid damage to the internal structure and ensure the flexibility and durability of the hose.
Scale removal: According to the water quality in the kitchen, soak or wipe the faucet body and nozzle with a special scale cleaner every 1-2 months to remove the accumulated scale. Scale not only affects the appearance of the faucet, but also reduces the water efficiency and water flow quality. After removing the scale, it should be fully rinsed to ensure that the detergent residue will not contaminate the food or tableware, and maintain the good performance and hygienic safety of the faucet.
Lubrication of moving parts: Add an appropriate amount of food-grade lubricant to the moving parts of the faucet, such as the stretching mechanism and the rotating joint, every quarter. This can reduce the friction between the parts, ensure the smoothness of the stretching and rotating movements, and prevent the parts from loosening or being damaged due to long-term friction. When adding lubricating oil, you should follow the instructions in the product manual to avoid excessive addition that may cause oil leakage and affect the kitchen hygiene environment. It is also beneficial to extend the service life of the faucet and ensure its stable operation in commercial kitchens.
A: These products typically use ceramic cartridges and multiple sealing structures, maintaining stable sealing performance even after 500,000 life cycle tests. As long as the installation meets standards and a qualified water supply hose is used, the probability of leaks under normal use conditions is low, making them suitable for long-term use.
A: Industry standards require the pull-out hose to pass at least 20,000 reciprocating tests, equivalent to approximately 3 years of use with 20 operations per day. In actual household use, the lifespan can usually be further extended under reasonable operating conditions.
A: The recommended working water pressure range for Brass Pull Out Kitchen Taps is 0.1–0.6 MPa, covering most residential water supply conditions. If the pressure exceeds this range, it is recommended to use a pressure reducing valve to ensure the long-term stability of the valve core and hose system.
A: This product usually comes with standard interfaces and installation components, and someone familiar with basic installation procedures can complete the installation within 30–45 minutes. However, in project-based or centralized installation scenarios, it is still recommended to have professional personnel handle the installation to ensure consistency.
A: Due to the high durability of the main structure and valve core, the maintenance frequency of Brass Pull Out Kitchen Taps is relatively low. Daily maintenance only requires cleaning the surface and periodically checking the interface seals. The overall maintenance cost is at a lower level compared to similar products.
Mobile Phone:
Phone:
Contact Now