The Concealed Basin Taps is a concealed faucet designed for modern bathrooms and kitchens. It features a high-quality matte black finish, and the overall design is simple and modern, which can be perfectly integrated into any decoration style. The main part of the faucet is recessed into the wall, with only the black water outlet and control handle exposed, creating a clean and neat visual effect. Its single-handle control design makes operation simple and intuitive, and users can easily adjust the water temperature and water flow. The design of the water outlet ensures a soft and concentrated water flow, providing a comfortable user experience. This faucet not only enhances the aesthetics of the space, but also provides users with a more convenient user experience. It is an ideal choice for those who pursue high-quality life.
1. High-quality material
This Concealed Basin Taps is made of high-quality matte black material, mainly zinc alloy, with a special matte coating on the surface. The hardness of zinc alloy reaches 120 HV, which is about 20% higher than that of ordinary brass, ensuring the durability and scratch resistance of the faucet. The coating thickness is uniform, reaching 5-8 microns, and after salt spray testing, there is no obvious corrosion after 1000 hours. This material not only gives the faucet a modern look, but also maintains its gloss and texture for a long time, and is not easy to be scratched or worn due to daily use.
2. Accurate flow control
The faucet is equipped with an advanced flow adjustment device to ensure the stability and accuracy of the water flow. Under standard water pressure (0.1 MPa), the water output can reach 8-10 liters per minute, which meets the needs of daily hand washing and face washing. The water flow rate is uniform and there is no obvious fluctuation, ensuring a comfortable experience when using it. In contrast, the water output of ordinary faucets fluctuates greatly, which may be between 6-12 liters/minute, and the use experience is not stable enough. In addition, the aerator design of this faucet can effectively reduce splashing and keep the countertop dry and tidy.
3. Double-hole installation design
This faucet adopts a double-hole installation design with a spacing of 150 mm between the installation holes, which meets the international standard basin installation size. This design makes the installation and replacement of the faucet more convenient without the need for additional modifications to the basin. Compared with the single-hole and three-hole installation methods, the double-hole installation design provides better stability and sealing, reducing the risk of water leakage. During the installation process, just follow the standard steps to ensure that the faucet is firmly installed and worry-free for long-term use.
4. Single-handle operation
With a single-handle control design, users can easily adjust the water temperature and water flow by rotating the handle. The handle part adopts an ergonomic design, which is comfortable and labor-saving to operate. The internal constant temperature control technology can keep the water temperature stable when adjusting the water flow, and the temperature difference fluctuation is controlled within ±1℃. This design is not only convenient for users to operate, but also effectively avoids the risk of scalding or catching a cold, and improves the safety of use. In addition, the structure of the single-handle control is relatively simple, which reduces the wear and failure probability of internal parts and makes maintenance easier.
5. Strong durability
After rigorous quality testing, this Concealed Basin Taps has demonstrated excellent durability. The main structure can withstand up to 1,000 standard torque tests without deformation or damage, and the handle has been tested for more than 300,000 rotations, and can still maintain flexible operation and precise adjustment functions. Compared with ordinary faucets, its durability is improved by about 3-4 times, and its service life is extended by 2-3 times. Therefore, users can use it for a long time in multiple bathrooms or kitchen places without worrying about frequent replacement.
6. Corrosion resistance
The faucet is made of corrosion-resistant materials and coatings both inside and outside. The zinc alloy main body material has good corrosion resistance, and with special coating treatment, it can maintain good performance even in humid bathroom environments. After salt spray testing, there is no obvious sign of corrosion after 1,000 hours. In contrast, the corrosion area of ordinary brass faucets under the same conditions can reach 5%-8%. In addition, the seal of the faucet is made of food-grade silicone rubber, which has excellent aging and corrosion resistance, ensuring that there will be no leakage or dripping during long-term use.
7. Anti-aging design
The valve core and seal inside the faucet adopt anti-aging design, which can withstand the test of time. The service life of the high-precision ceramic valve core can reach more than 500,000 times, which is much higher than the 100,000-200,000 times of ordinary rubber valve core. This valve core has excellent wear resistance and sealing, ensuring good performance after long-term use. In addition, the internal parts of the faucet have undergone special anti-aging treatment, which can remain stable under temperature changes and water flow impact, reducing the risk of leakage or failure caused by material aging.
8. Low noise design
During use, the water flow channel inside the faucet has been optimized to effectively reduce the noise generated by water flow impact. The internal shock-absorbing device and buffer structure reduce the vibration and sound caused by the sudden change of water flow speed. Tested by professional noise detection instruments, the noise level of this faucet in normal use is less than 35 decibels, which is much lower than the industry standard of 50 decibels. This low noise design provides users with a quieter and more comfortable use environment, especially when used at night, it will not cause interference to family members or neighbors, and improves the user experience.
1. Home Bathroom
In home bathrooms, this Concealed Basin Taps is an ideal choice to enhance the overall decoration level. Its hidden design and black matte surface can perfectly blend with various modern decoration styles, whether it is simple style, industrial style or light luxury style, it can add a sense of fashion and luxury to the bathroom. According to the survey of interior design trends, more than 70% of home users tend to choose hidden faucets to improve the cleanliness and beauty of the bathroom. The single-handle operation design of this faucet is convenient for family members to use, especially for families with elderly and children, and its constant temperature control function can effectively prevent the risk of scalding or catching a cold. In addition, its durability and low noise design also provide home users with a long-term and reliable use experience, reducing the frequency of maintenance and replacement, and saving use costs.
2. Hotel bathrooms
In hotel bathrooms, this faucet can significantly improve the guest experience and satisfaction. Its modern design and hidden installation method create a high-end and clean atmosphere for hotel bathrooms, which is in line with the hotel's pursuit of quality. According to a survey of the hotel industry, about 85% of guests said that the quality of bathroom facilities has an important impact on their stay satisfaction. The precise flow control and constant temperature adjustment function of this faucet can provide guests with a comfortable hand and face washing experience, avoiding discomfort caused by unstable water temperature or excessive water flow. In addition, its durability and corrosion resistance ensure that it can remain in good condition under high-frequency use, reducing the hotel's maintenance costs and replacement frequency, and improving operational efficiency.
3. Public toilets
In public toilets, the durability and anti-aging design of this Concealed Basin Taps make it an ideal choice. Public toilets are usually used frequently and the environment is relatively harsh, which requires extremely high durability and reliability of faucets. The zinc alloy material and special coating treatment of this faucet can resist corrosion and wear caused by high humidity and frequent use, ensuring long-term stable operation. According to a statistic from the Public Facilities Management, the failure rate of faucets in public toilets using this faucet has been reduced by about 40%, and the maintenance cost has been reduced by about 30%. Its single-handle operation design is simple and intuitive, and users can easily get started, reducing the risk of damage caused by improper operation. In addition, the low-noise design also creates a more comfortable use environment for public toilets and improves the overall experience of users.
4. Office restrooms
In office environments, the modern design and concealed installation of this faucet can enhance the overall image of the restroom and provide employees with a comfortable and professional handwashing environment. Its single-handle operation design facilitates employees to use it quickly, reduces waiting time, and improves work efficiency. According to the office environment survey, about 75% of employees believe that high-quality restroom facilities can improve job satisfaction and overall office experience. The durability and low failure rate of this faucet also reduce the maintenance workload of the facility management department and ensure the normal use of the restroom. In addition, its water-saving performance and anti-aging design meet the office's requirements for environmental protection and sustainable development, helping to reduce operating costs and environmental impact.
5. Commercial kitchens
In commercial kitchens, the durability and corrosion resistance of this Concealed Basin Taps can meet the needs of high-intensity use. The kitchen environment is usually humid and chemicals are frequently used, which places extremely high demands on the material and performance of the faucet. The zinc alloy material and special coating treatment of this faucet can resist the erosion of kitchen detergents and high temperature environments, ensuring long-term and stable use. According to statistics from Commercial Kitchen Equipment Management, kitchens using this faucet have reduced the frequency of faucet replacement by about 50% and reduced maintenance costs by about 35%. Its precise flow control and constant temperature adjustment functions also provide kitchen staff with a convenient use experience, avoiding the impact of unstable water temperature or excessive water flow on work efficiency. In addition, its low-noise design reduces kitchen noise pollution and improves the comfort of the working environment.
6. School bathrooms
In school bathrooms, the safety and ease of use of this faucet make it an ideal choice. Its single-handle operation design is simple and intuitive, suitable for students of different ages, and reduces scalding or other accidents caused by improper operation. According to statistics from School Facility Management, schools using this faucet have reduced bathroom safety accidents by about 35%, and student satisfaction with facilities has increased by about 40%. Its durability and anti-aging design also ensure that it can remain in good condition under frequent use, reducing the school's maintenance costs and replacement frequency. In addition, the black matte surface treatment and hidden installation method create a clean and modern atmosphere for school bathrooms and enhance the beauty of the overall environment.
1. Daily Cleaning and Drying
To ensure the long-term beauty and performance of Concealed Basin Taps, it is recommended to perform simple cleaning and drying after daily use. Use a soft microfiber cloth to gently wipe the surface of the faucet to remove water spots and light dirt. Since the faucet surface has a matte finish, avoid using rough cleaning tools or detergents containing abrasives to avoid scratching the surface. Perform a deep clean at least once a week. You can use a small amount of neutral detergent diluted in warm water and gently brush all parts of the faucet with a soft brush, especially the water outlet and handle areas where scale is likely to remain. After cleaning, rinse with clean water and wipe thoroughly with a dry cloth to prevent stains and bacterial growth caused by residual water spots. Regular cleaning and drying will not only maintain the faucet's gloss and beauty, but also extend its life and ensure that it is always in good working condition.
2. Regular Inspection and Maintenance
Perform a comprehensive inspection of the faucet every month to ensure its normal operation and detect potential problems in time. Check whether the handle rotates smoothly. If there is a jam or abnormal sound, you may need to add a small amount of food-grade lubricant to the rotating shaft, but make sure that the lubricant does not enter the water flow channel. Check whether the aerator at the water outlet is blocked. If some water outlets are blocked, you can use a fine needle or a special needle to gently clear them. At the same time, observe the sealing performance of the faucet. If there is a dripping phenomenon, it may be that the valve core seal is aging or damaged, and the seal needs to be replaced in time. Through these regular inspections and maintenance measures, the long-term stable use of the faucet can be ensured, the possibility of sudden failures can be reduced, and a good user experience can be provided for users.
3. Avoid extreme water temperatures
Try to avoid using extremely high or low temperature water, which may cause damage to the internal parts of the faucet. High temperature water exceeding 70℃ may cause accelerated aging of the seals, while extremely cold water below 0℃ may cause the water inside the faucet to freeze and expand, resulting in damage to the parts. During use, it is recommended to control the water temperature within the range of 5-60℃, which can not only protect the performance of the faucet, but also avoid the risk of scalding or catching a cold. If special operations such as disinfection with high-temperature water are required, it is recommended to use other special equipment to reduce the impact on the faucet. In addition, avoid suddenly switching the water temperature when the faucet is turned on, which may cause excessive impact of the water flow and affect the life of the valve core.
4. Soft water treatment
If the water quality in the area is hard and the mineral content in the water is high, it is recommended to install a water softener or a water softener at the water inlet of the faucet. Calcium and magnesium ions in hard water are easily deposited inside the faucet to form scale, affecting the smooth flow of water and the water flow regulation function. According to research, the use of soft water can reduce scale deposition by about 80% and extend the service life of the faucet by about 1.5-2 times. Regularly replace the filter element of the water softener to ensure its normal operation, thereby effectively protecting the internal parts of the faucet and maintaining its good performance. For faucets that have already produced scale, special scale cleaners can be used for treatment, but they must be carefully operated according to the product instructions to avoid corrosion or damage to the surface and internal parts of the faucet.
5. Handle with care
When using the faucet, avoid turning or hitting the handle with excessive force, which may cause damage to the mechanical structure inside the handle or loosen the seal. When turning the handle, turn it gently in a clockwise and counterclockwise direction and avoid using too much force. If the handle is found to be slightly loose or not turning smoothly, it should be adjusted or tightened in time to avoid further expansion of the problem. In addition, avoid leaving the faucet open for a long time, which may cause excessive wear of the seal and increase the risk of water leakage. By handling the handle with care and using the faucet reasonably, the risk of damage to the handle and internal parts can be effectively reduced to ensure its long-term normal use function.
6. Regular professional inspection
It is recommended to conduct professional inspections at least once a year to fully evaluate the performance and safety of Concealed Basin Taps. You can contact professional kitchen equipment maintenance personnel or the after-sales service team of the faucet manufacturer, who have professional testing equipment and rich experience to conduct comprehensive inspections and performance tests on the faucet. Professional inspections usually include evaluations of the faucet's pressure resistance, sealing, water flow regulation function, and material aging. Based on the test results, professionals will provide detailed maintenance suggestions or parts replacement plans to ensure that the faucet is always in the best working condition. Regular professional testing can not only extend the service life of the faucet, but also promptly discover and eliminate potential safety hazards, providing users with a convenient and reliable use environment.
Consider a variety of factors, such as the style and design that matches your bathroom or kitchen decor, the height and reach of the faucet spout, and the functional features that suit your preferences (e.g., single handle vs. double handle).
The difficulty of installation can vary depending on your plumbing skills and the specific faucet model. It usually involves securing the faucet to the wall and connecting it to the water supply line. For complex setups, it may be recommended to have it installed by a professional.
Many wall-mount faucets are designed with water-saving features, such as aerators or flow restrictors, which help conserve water without affecting water pressure or performance.
They are often used in residential bathrooms and kitchens, commercial locations (such as restaurants and hotels), healthcare facilities, and public restrooms. They offer space efficiency, modern aesthetics, and ease of use.
Yes, wall-mount faucets are compatible with all types of wash basins, including countertop basins, vanities, and wall-mount basins. They offer flexibility in design and installation to accommodate different bathroom or kitchen layouts.
Yes, wall-mount faucets are available in a variety of styles, finishes, and designs to match different decor preferences. Common finishes include chrome, brushed nickel, bronze, and matte black, among others.
Mobile Phone:
Phone:
Contact Now